Let us begin with a small introduction to the grease trap. A grease trap or grease interceptor has different sizes from small to large. Typically it is connected to a sink, and the main task is preventing FOG (fat, oil and grease) from entering into the sewer system. Especially grease traps are found in commercial kitchens and they function properly only when cleaning and maintenance are done at regular intervals.
Importance of grease traps
Restaurants require grease traps for servicing a lot of meals day after day, and the meal should be healthy and delicious. The grease trap service near me takes all the waste from cooking and then holds the FOG while the wastewater gets filtered into the city sewer. This procedure helps in supporting the hygiene and health of your business. It helps in preventing accidents by keeping the floors free from grease, keeping the commercial equipment free from messy oils for avoiding fires and you can also be able to save money by avoiding expensive city fines and fees by keeping FOG out of the sewer tank.
The city sewer systems require restaurants for operating grease traps for keeping FOG out of the city pipes so that the city lines do not get blocked or clogged, and flooded streets, commercial establishments as well as homes can be averted. Grease interceptors help in protecting the environment within a community and reduce the city cost by limiting the staff and time it takes for cleaning and maintaining the city sewer lines.
Working of grease traps
There are different types of grease traps, and each trap is being set up a bit differently. But most of the grease traps are having the same parts and also function in the same manner. There is an inlet pipe that carries the FOG and the water before entering into the trap. The next is a flow rate controller that helps in slowing down the wastewater as it enters the trap for preventing it so that it does not overflow. It also has an air vent to control the pressure. Baffles that are metal sheets are found inside the trap for separating the FOG solids from the wastewater. Water is used for cooling down the FOGs and is converted into solids so they can be separated easily and stay in the grease trap rather flowing to the city sewer lines. Finally, there is an outlet pipe where the wastewater flows from before it enters the city sewer pipes.
Replacing grease trap
Grease trap service near me helps to replace your restaurant grease trap due to several reasons. Your trap becomes old or damaged and no longer working; you are expanding your business and require a big trap or trap is not compliant. You can have any reason, but the fact is you require a valuable and reliable working grease trap. Although the traps are made of tough materials like metal, fiberglass, concrete, etc., they have a shelf like and can take a beating. But, FOGs are toxic compounds and with time, can damage your trap significantly. FOGs cause corrosion and deterioration and slowly eat all materials even with daily cleaning and cause your commercial grease trap to break-down and eventually stop working.
Before purchasing a new grease trap, it is vital doing your due diligence. You should the characteristics of the new trap and ask your local authority to know what is being added in the list of must-have for staying compliant.
What is the outcome when not cleaning your grease trap?
Dirty grease traps cause a lot of significant and small problems when you do not maintain them properly. Restaurant grease fills the trap very fast with all the meals cooked and in such a short time. Your restaurant will not work efficiently due to back up commercial grease traps and also damage the sewer system of the city. This problem affects neighborhood parks, residential homes, streets, the whole town, and much more. It also causes foul odors, flooding, attracts vermin and flies and carries deadly bacteria. Greasy waste and sludge floating around the town is not at all appealing and you can easily avoid these problems by hiring a grease trap service near me.